do_adsb_out_ident
PX4 capability domain: do-control. PX4 mapping: MAV_CMD_DO_ADSB_OUT_IDENT.
Trigger the start of an ADSB-out IDENT. This should only be used when requested to do so by an Air Traffic Controller in controlled airspace. This starts the IDENT which is then typically held for 18 seconds by the hardware per the Mode A, C, and S transponder spec.
Request Params
Fixed value
px4Target PX4 device ID
Fixed value
do_adsb_out_identIdempotency key; repeated requests return the same command
Timeout in seconds, range
0~300Empty object
{}PX4 Frame Mapping
- MAVLink command:
MAV_CMD_DO_ADSB_OUT_IDENT - Command ID:
10001 - Default transport:
COMMAND_LONG - Source XML:
common.xml - Completion:
COMMAND_ACK - Guard: real PX4 downlink is disabled by default; guarded mode requires explicit authorization and a ready transport.
Create Response
Platform command ID, used for follow-up queries
Acceptance status:
ACCEPTEDCommand acceptance time (UTC)
Query Response
Platform command ID
Execution status:
ACCEPTED / DELIVERED / SUCCEEDED / FAILED / TIMED_OUT / UNMATCHED_RESPONSEVendor identifier; fixed value
px4Target PX4 device ID
PX4 command type
Mapped
COMMAND_ACK.result valuePX4 acknowledgement summary
Raw PX4 acknowledgement summary, including MAVLink command ID and transport
PX4 ACK Mapping
After sending the frame, the PX4 agent waits forCOMMAND_ACK and correlates the response by command id. Disabled mode sends no frame and completes with a rejected lifecycle result.